Applied Chemical Engineering to Oil, Gas & Chemical Fields - Module 1
GENCHI1-EN-P
Who should attend?
This course provides a more in-depth knowledge on the operation and operating conditions of the material and processes in refining, petrochemical and heavy chemistry sites as well as a strong foundation in the use of process simulation software.
Public :
Engineers and technicians whose activities are related to the operation of industrial sites: production, maintenance, plant projects, process control, laboratory, engineering, R&D, etc.
Every type of activities is concerned: refining, petrochemistry, heavy chemistry, engineering.
Level :Expert
Prerequisite :
To fulfill at least one of the following criteria:
to have a Master degree or equivalent in process, engineering, industrial chemistry,
or to have knowledge in refining processes,
or to have more than 3 years' proven technical experience in the refining industry,
or to be in the process of moving to a new position requiring competences in chemical engineering.
Material and energy balances in continuous processes.
Fluid properties, law of corresponding states, equations of state.
Liquid-vapor equilibria. Calculation principle.
Thermodynamic models applicable to hydrocarbon mixtures.
Non ideal mixtures, water-hydrocarbon mixtures.
Distillation:
Design principles of distillation columns.
Operating parameters of industrial distillation columns: material balance, pressure, operation of the liquid-vapor contact material, heat balance, implementation of reboilers and condensers, liquid-vapor traffics, temperature and composition profiles.
Distillation column control: basic control, sensitive tray, control of calculated variables, advanced control.
Characteristics of the single-phase liquid and gaseous flows.
Flow rate measurement with measuring devices.
Determining pressure drops in sites, influence of the valves.
Characteristic curve of a circuit, examples of typical circuits.
Liquid-gas two-phase flow map.
Pumping and compression:
Functions and elements of the main rotating equipment.
Operation of the centrifugal pumps and characteristic curves.
Connections pump-circuit. Adjustment to the operating conditions: changes in the flow rate, the product, temperature, cavitation.
Gas behavior during compression.
Operation of reciprocating and centrifugal compressors.
Adjustment to the operating conditions: change in the efficiency, operating limits.
Module 3: HEAT & ENERGY TRANSFER, PRELIMINARY DESIGN
-
Duration : 4 Days
Heat transmission:
Reminders on thermodynamics in heat transfer.
Conduction and convection: parameters that affect the exchange, means of calculation.
Radiation: emission, absorption, application to furnaces and boilers, tube skin temperature.
Exchangers - Furnaces and boilers:
Function, classification and terminology of heat exchangers.
Performances of the exchangers depending on the fluid circulation mode, evolutions depending on changes in the operating conditions.
Design principle of the exchangers and introduction to energy efficiency.
Combustion, energy balance (radiation and convection zone) and efficiency determination of energy recovery in furnaces and boilers. Heat exchanges in the radiation section. Circulation of air and stack fumes.
Preliminary project:
An application related to the study of an industrial site allows the implementation of the knowledge acquired corresponding to the different disciplines of chemical engineering presented over the three training weeks, the great principles of design and an economic evaluation of the process.
Learning Objectives
Attendees will be able to implement the following skills:
Specify the principles of chemical engineering governing the operation of equipment.
Ways & Means
Specific and original documentation covering different topics from an applied angle.
Numerous applications and case studies related to industrial situations.
Data, diagrams, graphs, various correlations presented in one single ring binder for easy reference after the course.
Learning assessment
Quiz at the end of each module.
More
Additional information :Training session split into three independent modules. To be eligible for certification, participants must attend all three modules.
Coordinator :Trainers having industrial experience in Applied Chemical Engineering.
To French entities : IFP Training is referenced to DataDock ; you may contact your OPCO about potential funding.
Please contact our disabled persons referent to check the accessibility of this training program : referent.handicap@ifptraining.com
IFPT Account
